No load-bearing walls are necessary for the CT System Wall. CT System Walls can be installed in the middle of a spacious hall, without any connection to the building. A minimum distance of 25mm to adjacent building walls is necessary.

The CourtTech System Wall has a total thickness of 94mm, consisting of two 21 mm thick RS special high density boards, attached to steel profiles. The self-supporting wall elements are fixed on steel columns to the floor at two positions. The surface of the finished wall has 3 coats of paint. The System Wall is filled with 2.5 tons of kiln dried sand. The System Wall is hard, flat and free of vertical joints. The out-of-play lines are aluminium profiles and powder coated red – RAL 3001.

Also, combination of both CourtTech Wall Systems can be applied in one court.